Plate heat exchanger is a kind of equipment that needs to be used in many industries. In order to make it more convenient for everyone to use, let me share with you some points that need to be paid attention to when installing plate heat exchangers.
1. After the equipment is unpacked, check item by item as listed in the packing list. If it does not meet the requirements, the supplier shall be notified to solve the problem in time.
2. There are hoisting holes on the equipment for hoisting. Before hoisting, select the wire rope according to the quality marked on the nameplate.
3. The equipment should be placed horizontally, and should be placed in a place where there is no blockage of pipes or other equipment, so that there is an operating space of about 1 meter around the equipment for easy maintenance.
4. If the outlet pressure of the pump is greater than the pressure of the equipment, a pressure reducing valve should be installed in the pipeline where the fluid enters the equipment.
5. When assembling the pressure control valve, it should be installed on the inlet pipe of the equipment, not at the outlet.
6. The inlet and outlet pipes of the equipment should be cleaned before installation to prevent sand, gravel, oil stains, welding slag and other debris from entering the equipment to avoid internal blockage or damage to the plates.